Bath size: 5100* 800* 700mm：L{250overflow+（700* 6）+650}* W800* H700mm，
Material:12mmpp board, strengthen with 80 * 60MM iron tube(Contains PP slot), outer seal 3mmPP board, external fixation with 12mmPP plate, 20mmPP board, Support with 15mmPP board, The track under the rack with 38 *38 *1.2mm stainless steel tube, hopper with 8mmpp board, anode copperΦ 25 * 2.5 purple copper plate: cathode 5 * 50 purple copper plate, ,cooperate with U type copper base and other conductive holes drilled in the middle of the production line
Size：Φ430*600mm
Materials：8mmpp domestic board for barrel body, splint 20mmPP board for，gear, splint. Axle sleeve，4 - 42 - tooth cast iron gear, transmission shaft withΦ20 stainless steel tube, support with brass rod connectingΦ 25 * 1.5 stainless steel tube, the barrel lifting rod with 38*38 * 3mm stainless steel, Pinion Stainless Steel flange，Conductive copper plate with 8 * 50 copper .6 barrel drill withΦ4,45 degree oblique angle. The hole in a barrel roll chamfer with plastic strip.
Materials：3 sets of WD47 Reducer,2sets of 0.75KW electric machinery 4 - 18 - tooth cast iron gear, 4 - chain wheel and chain,Φ70 Motor belt pulley,Φ140 Reducer belt pulley
Materials: Crane roof， 3mm#304 stainless steel plate for wheelchair, 1.2mm#304 stainless steel plate for column ,Φ32*1.2 stainless steel tube，1 sets of WD47 Reducer,1 set of 0.37KW electric machinery ,bearing seat, sprocket, etc.
Note：one bright alkali copper (to be heated), one bronze (need to be cooling), one white bronze (thickened) (to be cooling), one white bronze (face) (to be cooling), one brass bronze(to be heated).Heating and cooling pipes should be installed at both ends, can not be placed at the bottom of the tank. Titanium tube customer self .