Bath size: 3000* 800* 700mm：L{250overflow+（700* 3）+650}* W800* H700mm，
Material:12mmpp board, strengthen with 80 * 60MM iron tube(Contains PP slot), outer seal 3mmPP board, external fixation with 12mmPP plate, 12mmPP board, Support with 15mmPP board, The track under the rack with 38 *38 *1.2mm stainless steel tube, hopper with 8mmpp board, anode copperΦ 25 * 2.5 purple copper, copper plate: cathode 5 * 50 purple copper plate, copper plate: anode 6*60 purple copper plate, cooperate with U type copper base and other conductive holes drilled in the middle of the production line
Size：Φ430*600mm
Materials：8mmpp domestic board for barrel body, splint 20mmPP board for，gear, splint. Axle sleeve，4 - 42 - tooth cast iron gear, transmission shaft withΦ20 brass rod connectingΦ 25 * 1.5 stainless steel tube, the barrel lifting rod with 38 Conductive copper plate with 8 * 50 copper 3 barrel drill with 4 to 45 degree oblique angle. 38 * 3mm stainless steel, Pinion Stainless Steel flange，Conductive copper plate with 8 x 50 copper .2 barrel drill with 4 to 45 degree oblique angle. The hole in a barrel roll chamfer with plastic strip.
Materials：3 sets of WD47 Reducer,1 set of 0.75KW electric machinery 4 - 18 - tooth cast iron gear, 4 - chain wheel and chain,Φ70 Motor belt pulley,Φ140 Reducer belt pulley
Materials: Crane roof， 3mm#304 stainless steel plate for wheelchair, 1.2mm#304 stainless steel plate for column ,Φ32*1.2 stainless steel tube，1 sets of WD47 Reducer,1 set of 0.37KW electric machinery ,bearing seat, sprocket, etc.